Rotax 914UL power package

by Michael A. Anderson

Rotax 914UL power package

Power your favourite recreational aircraft with the unparalleled power to weight ratio of this aircraft engine
Choose your options and view your total at the bottom of the page.


1. Engine

New Rotax 914UL aircraft engine
  • 115HP @ 5800 RPM (max 5 min)
  • 100HP @ 5500 RPM (sustained)
  • 106 ft-lb @ 4900 RPM
  • Free air cooled cylinders, liquid cooled cylinder heads with integrated pump and expansion tank
  • Dry sump forced lubrication with integrated pump and separate oil tank
  • 8 valves, automatic adjustment by hydraulic valve tappet
  • Dual Capacitor Discharge Ignition (DCDI) with RFI noise suppression
  • Garrett turbocharger with automatic waste gate control
  • Two Bing Constant Depression (CD) carburetors
  • Two electric fuel pumps
  • Integrated reduction gearbox, ratio of 2.43:1
  • Time Between Overhauls (TBO): 1200 hours

More Rotax 914UL Specifications

Rotax 914UL aircraft engine
Professionally overhauled engine with all updates, as complete as a new engine.

2. Gearbox

Rotax Slipper clutch
Included with zero-timed engine, optional with new engine.
Reduces vibration at low RPM and prevents expensive crankshaft and peripheral damage in the event of a propeller strike.

3. Intake

Rotax / K&N RU0800 cylindrical air filter
K&N Air Filters are washable and reusable.

4. Oil circuit

Rotax remote oil tank
The Rotax 4-stroke Aircraft Engines use a dry sump forced lubrication system with remote oil tank.
Large size Rotax oil cooler with mounting kit
131x216x42mm / 5.16×8.50×1.65″
A large size oil cooler is required for the 914UL.
Perma-Cool Oil thermostat
With 1/2″ oil line fittings (not shown)
An oil thermostat ensures that the oil is never too cool: under 180F/82c, it re-circulates 90% of the oil through the engine. Over that temperature, it allows 95% of the oil into the cooler. Helps reduce engine wear. No need for unsightly duct tape over your oil cooler! Approved by Rotax (SL-912-011/914-009).

5. Liquid circuit

Rotax liquid radiator
142x415x49mm / 5.59×16.34×1.93″
The perfect size and airflow for most installations.
Rotax Overflow bottle
142x415x49mm / 5.59×16.34×1.93″
Marked with minimum and maximum levels according to Rotax specifications.
APT Straight liquid outlet
CNC Machined from 6061-T6 billet aluminium.
Replaces bent liquid outlet on liquid pump. Useful where hose routing is problematic due to interference with engine mount or other parts.

6. Exhaust

Rotax stainless steel exhaust
The 914’s exhaust system comes pre-made and pre-installed.

7. Fuel system

Rotax / Pierburg electric fuel pumps (2x)
With 3/8″ hose fittings
The arrangement of the two fuel pumps connected in series yields better reserves against vapour formation at high altitudes and temperatures.
Andair Check Valves (2x)
Quality machined anodized L168 aluminium.
With 3/8″ hose fittings.
$140.00 for both
The two check valves in the system are necessary to warrant trouble free operation of the fuel system with one pump only.
ACS Gascolator
Machined anodized aluminium and steel construction. With fine steel filter element, drain valve and provision for primer line connection.
A water strainer (gascolator) should be part of all aircraft fuel systems. It ensures that any water that could have been drawn into the system will not reach the engine.
Wix fuel filter
Paper element filter with 3/8″ hose fittings.
This high quality filter is easy to inspect.

8. Engine mount

Engine-side ring mount
The Rotax 914UL comes with the engine-side ring type mount already installed.
APT Firewall-side engine mount hardware kit
Includes all machined steel parts, Lord rubber blocks, cupped washers and hardware to design and build your own engine mount. Just add your own tubing.
When installing a 914UL, you will need a firewall-side engine mount.
They are available in different levels of completion.
APT Firewall-side engine mount
partial build kit

Firewall-side ring receptacle already assembled. Includes Lord rubber blocks, cupped washers and hardware. Also includes all  tubing and machined parts to design and build your own structure from ring to firewall.
APT Firewall-side “Bolt-on” engine mount
A complete engine mount, assembled, painted and ready to install. Available for most installations without nose wheel structure using 4 or 5 point mounting to flat firewalls.
(in most cases. contact us with your application)

9. Electric system

Rotax standard electric starter
New and zero-timed Rotax 4-stroke Aircraft Engines come standard with these electric parts.
Rotax electric starter solenoid
Rotax voltage regulator-rectifier
Genesis G16EP Battery
16Ah capacity, 6.1Kg / 13.5 lbs
These batteries feature sealed pure lead technology for the ultimate in safety (nonspillable, can be installed in any position) and starting power.
16Ah is the minimum recommended capacity and is sufficient for a correctly set up engine. The 26Ah version adds even more margin.
Genesis G26EP Battery
26Ah capacity, 10.1Kg / 22.3 lbs

10. Propeller

Note: This is just a sample of the many different propeller types and configurations available through us. Please contact us to discuss your specific needs.
GSC Tech 2 A 2 blade
Add urethane leading edge $80.00
The GSC Tech A series ground adjustable pitch propellers feature wooden blades with aluminium roots, machined aluminium hub and optional urethane leading edge protection.
A good performance, economical propeller.
Your choice of diameter and right (tractor) or left (pusher) directions.
GSC Tech 3 A 3 blade
Add urethane leading edge $100.00
Powerfin F model 3 blade
The Powerfin F model ground adjustable pitch propellers feature composite blades with machined aluminium “Apex” hub and standard urethane tape leading edge protection.
A light and efficient propeller.
Your choice of diameter and right (tractor) or left (pusher) directions.
Powerfin F model 4 blade
Warp Drive 2 blade standard, HP-L hub
Add tapered “constant speed” profile $125.00
Add nickel leading edge$125.00
The Warp Drive ground adjustable pitch propellers feature composite blades with aluminium roots, machined aluminium hubs and optional inlaid nickel leading edge protection.
The nickel offers the ultimate in durability while the tapered blade offer great cruise performance in faster aircraft without sacrificing too much takeoff performance.
Your choice of diameter and right (tractor) or left (pusher) directions.
Warp Drive 3 blade standard, HP-L hub
Add tapered “constant speed” profile$190.00
Add nickel leading edge $190.00
Threaded inserts for propeller flange (set of 6)
Your choice of 5/16-20UN or M8x1.5.
These threaded inserts are installed through the propeller flange. They ensure a more secure propeller installation by preventing the propeller attachment bolts from bearing shear loads.

11. Engine controls

Aero Controls Throttle Cable
Precision threaded cable ends for precise adjustment with each carburetor. 72″ length from splitter to cockpit-side cable end fits most installations. Other lengths available on request.
On Rotax 4-stroke Aircraft Engines, the actuation of both carburetors needs to be perfectly synchronized. The best way to achieve this is to use our high quality Aero Controls cables. A single cable is used from your throttle control to the splitter, where is is then split into two cables, one for each carburetor. Stainless steel cables running inside maintenance-free nylon and wound steel housings ensure the smoothest and most precise operation.
More information about our Aero Controls products
Aero Controls Choke Cable
Similar to throttle cable but with straight cable end compatible with the elbow and adjusting screw found standard on these carburetors.

12. Engine monitoring

VDO Oil temperature probe
New and zero-timed Rotax 4-stroke Aircraft Engines come standard with these probes.
VDO Oil pressure probe
VDO Cylinder head temperature probes (2x)
Set of VDO and Westach 2″ size instruments

  • VDO Tachometer
  • VDO Hourmeter
  • Westach Two-in-one EGT
  • VDO Oil Temperature
  • VDO Oil Pressure
  • 2 Westach EGT probes (screw type)
    panel size: 6x�51mm / 2″
It is essential to monitor the following engine parameters to ensure its proper operation:

  • Tachometer (RPM)
  • Hourmeter
  • Cylinder Head Temperature (CHT) for at least one cylinder
  • Exhaust Gas Temperature (EGT) for at least two cylinders
  • Oil Temperature
  • Oil pressure

There are different ways to accomplish this. The first is to use the classic analog (steam gauge type) instruments.

MGL Stratomaster E1:

  • Tachometer
  • Hourmeter
  • 2xCHT
  • 2xEGT
  • Oil Temperature
  • Oil Pressure
  • 2 Westach CHT probes (screw type) are used in place of standard VDO probes
  • 2 MGL EGT probes (screw type)
    Panel size: 89mm / 3-1/2″
The alternative is to use a digital all-in one instrument. Our selection provides precise and reliable readings on backlit liquid crystal displays (LCD) and has the advantage of being able to trigger a warning light to attract your attention if a parameter is out of limits.
More information about instrument packages for the 914UL
MGL Stratomaster E2:

  • Tachometer
  • Hourmeter
  • 2xCHT
  • 4xEGT
  • Outside air temperature
  • Fuel level, fuel flow (also computes both for endurance)
  • Voltmeter, maintenance timer, running memory
  • 4 MGL EGT probes (srew type)
  • Outside air temperature probe
  • Fuel flow probe
    Panel size: 202x92mm / 7.95×3.62″

Currency: Canadian Dollars. Check current exchange rates
Suggested list prices.  This total is an estimate. Prices are subject to change without notice. Shipping and applicable taxes not included.

Please contact us for your best deal!